Gearbox V2
21. Top Shim
Add top shims to the gears. Again: Try it out with a closed box with all the screws in! Make sure everything glides smooth!
22. Bushings
Add the top gear bushings.
23. Loader
Add the nozzle retractor (on this box its see threw) it sits on top of the sector gear, and below the upcoming cylinder.
24. Spring
Add the nozzle retractor spring.
25. Head
Take the cylinder and cylinder head.
26. Join
Join the head and cylinder, make sure you have an air tight seal. The O-ring on the head and some grease should ensure this!
27. Cylinder
Add in the cylinder and head, so they lock in place.
28. Nozzle
Put in the air nozzle. Some nozzles come with a small O-ring that goes on the piston head end. This will ensure a tight seal.
29. Piston
Assemble the piston and piston head. It's just a screw on the end. and make sure they will be air tight in the cylinder.
30. Merge
Put the cylinder in the piston.
Previous Page - Next Page